automatic drilling toolfeed controller - перевод на русский
Diclib.com
Словарь ChatGPT
Поиск в словаре Индивидуальные решения
Введите слово или словосочетание на любом языке 👆
Язык:

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология
  1. Словари
  2. Англо-русский словарь
  3. automatic drilling toolfeed controller

automatic drilling toolfeed controller - перевод на русский

SUBSET OF PETROLEUM ENGINEERING
Drilling engineer; Drilling engineers
Найдено результатов: 973
automatic drilling toolfeed controller      

нефтегазовая промышленность

автоматический регулятор подачи бурового инструмента

disk controller         
CONTROLLER FOR DISK STORAGE, USUALLY INTEGRATED INTO THE DRIVE
Hard disk controller; Hard drive controller; HD controller; Drive controller

общая лексика

дисковый контроллер, контроллер диска

плата расширения и/или микросхема, обеспечивающая взаимодействие процессора с дисковым накопителем

drilling mud         
  • Baryte powder used for preparation of water-based mud
  • Unlined drilling fluid sumps were commonplace before the environmental consequences were recognized.
  • Fluid Pit
  • Fly Ash]] absorbent for fluids in mud pits
  • Mud Pit
  • Mud pit with fly ash
AID FOR DRILLING BOREHOLES INTO THE GROUND
Spud mud; Drilling mud; Drilling Mud; Drilling Fluid; Artificial mud; Drilling fluids; Well drilling fluid; Well drilling fluids

строительное дело

буровой раствор

нефтегазовая промышленность

промывочная жидкость

PID controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error
ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением
three term controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error

строительное дело

ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением

drilling fluid         
  • Baryte powder used for preparation of water-based mud
  • Unlined drilling fluid sumps were commonplace before the environmental consequences were recognized.
  • Fluid Pit
  • Fly Ash]] absorbent for fluids in mud pits
  • Mud Pit
  • Mud pit with fly ash
AID FOR DRILLING BOREHOLES INTO THE GROUND
Spud mud; Drilling mud; Drilling Mud; Drilling Fluid; Artificial mud; Drilling fluids; Well drilling fluid; Well drilling fluids

нефтегазовая промышленность

буровой раствор

промывочная жидкость

drilling mud         
  • Baryte powder used for preparation of water-based mud
  • Unlined drilling fluid sumps were commonplace before the environmental consequences were recognized.
  • Fluid Pit
  • Fly Ash]] absorbent for fluids in mud pits
  • Mud Pit
  • Mud pit with fly ash
AID FOR DRILLING BOREHOLES INTO THE GROUND
Spud mud; Drilling mud; Drilling Mud; Drilling Fluid; Artificial mud; Drilling fluids; Well drilling fluid; Well drilling fluids
буровой раствор
three term controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error
ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением
PID controller         
  • Showing the evolution of analog control loop signaling from the pneumatic to the electronic eras
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>d</sub> (''K''<sub>p</sub> and ''K''<sub>i</sub> held constant)
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>i</sub> (''K''<sub>p</sub> and ''K''<sub>d</sub> held constant)
  • Proportional control using nozzle and flapper high gain amplifier and negative feedback
  • Effects of varying PID parameters (K<sub>p</sub>,K<sub>i</sub>,K<sub>d</sub>) on the step response of a system
  • A [[block diagram]] of a PID controller in a feedback loop. ''r''(''t'') is the desired process value or setpoint (SP), and ''y''(''t'') is the measured process value (PV).
  • PID with derivative filtering
  • PID without derivative filtering
  • Response of PV to step change of SP vs time, for three values of ''K''<sub>p</sub> (''K''<sub>i</sub> and ''K''<sub>d</sub> held constant)
  • Basic block of a PI controller
  • alt=
  • Early PID theory was developed by observing the actions of [[helmsmen]] in keeping a vessel on course in the face of varying influences such as wind and sea state.
  • Current loops used for sensing and control signals. A modern electronic "smart" valve positioner is shown, which will incorporate its own PID controller.
CONTROL LOOP MECHANISM USED IN CONTROL ENGINEERING
PID loop; Proportional-Integral-Derivative controller; PID tuning; PID algorithm; Proportional integral derivative; PI controller; PD controller; PID control; PI Controller; Pi controller; Pidc; PID Controller; Proportional–integral–derivative controller; P.I.D. control; Droop (control); Proportional-integral-derivative controller; PID feed back controller; PID feedback controller; Three term controller; Steady-state error

строительное дело

ПИД-регулятор, пропорционально-интегральный (изодромный) регулятор с предварением

floppy-disk controller         
  • A setup disk of Japanese [[Microsoft Office]] 4.3, provided with 3.5" 1.2&nbsp;MB and 1440&nbsp;KB formats.
CIRCUITRY THAT CONTROLS READING FROM AND WRITING TO A COMPUTER'S FLOPPY DISK DRIVE
Floppy Disk Controller; Intel 82072A; Intel 82072; NEC µPD765; NEC uPD765; Floppy controllers; 3 mode; 3-mode; 3mode; Floppy disk controller; NEC D765; NEC 765; NEC 765A; NEC D765A; NEC µPD765A; ΜPD765; ΜPD765A; NEC uPD765A; UPD765; UPD765A; D765A; Intel 8072A; NEC μPD765; NEC μPD765A; Floppy controller; FDC controller; Philips interface bus; Floppy diskette controller; Diskette controller; Floppy disk drive controller; 2HC

общая лексика

контроллер НГМД

Определение

АРУЗ
(аруд) (араб.), система метрического стихосложения, возникшая в классической арабской поэзии и распространенная (вплоть до 20 в.) в ряде стран Ближнего и Ср. Востока. Ритмообразующий элемент стиха в арузе - варьирующееся чередование долгих и кратких слогов.
Показать больше определений

Википедия

Drilling engineering

Drilling engineering is a subset of petroleum engineering.

Drilling engineers design and implement procedures to drill wells as safely and economically as possible. They work closely with the drilling contractor, service contractors, and compliance personnel, as well as with geologists and other technical specialists. The drilling engineer has the responsibility for ensuring that costs are minimized while getting information to evaluate the formations penetrated, protecting the health and safety of workers and other personnel, and protecting the environment.

https://en.wikipedia.org/wiki/Drilling engineering
Как переводится automatic drilling toolfeed controller на Русский язык
Поиск в словаре
Все словари Английский словарь Англо-арабский словарь Англо-голландский словарь Англо-греческий словарь Англо-испанский словарь Англо-итальянский словарь Англо-немецкий словарь Англо-русский словарь Англо-французский словарь Арабский словарь Голландский словарь Греческий словарь Испанский словарь Итальянский словарь Итальянско-русский словарь Латинско-испанский словарь Латинско-португальский словарь Немецкий словарь Португальский словарь Португальско-русский словарь Русский словарь Французский словарь Французско-русский словарь
Создано ИИ
Английский Русский Испанский Португальский Немецкий Французский Греческий Голландский Итальянский Арабский
Язык интерфейса
Русский English Español Português Deutsch Français Ελληνικά Nederlands Italiano عربي
Контакты
Свяжитесь с нами



Конфиденциальность
Политика конфиденциальности